How to Create a Guest Network with an AirPortĭid you know that your AirPort base station is capable of creating two separate wi-fi networks? By enabling the guest network feature, you can create a second network specifically for guests or - since guest wi-fi networks can be open or protected with a password - authorized users. The base station’s password is usually specified when setting up the AirPort, but it can be changed at any time. Doing so will prevent users connected to the AirPort network from modifying the base station’s settings with the AirPort Utility application. Whether you operate a guest network on your AirPort or simply use it to provide wireless access to the people in your home or workplace, you should ensure that your AirPort base station’s settings are protected with a strong password. How to Password Protect an AirPort's Settings The choice is made for you automatically, and you’ll probably never notice the difference. That should be fine under normal circumstances. That means that when you connect a Mac, iPhone, or iPad to an AirPort’s wireless network, it will automatically select and use one of the bands for the best speed, consistency, and range. What’s the difference between a static IP address and a DHCP reservation? Creating a Dedicated 5GHz AirPort NetworkĪirPort base stations released after 2009 are capable of operating over both 2.4GHz and 5GHz bands simultaneously. But if you own an AirPort Extreme, AirPort Express, or Time Capsule base station, you can use something called DHCP reservations to do essentially the same thing. In a previous tutorial, you learned how to set a static IP address in Mac OS X to create a permanent, private IP address for your Mac that doesn’t change from one day to the next. Setting DHCP Reservations on Your AirPort And if you have children, you can set time limits for specific devices in your home. For example, if you own a cafe and provide free wi-fi access, you can configure the AirPort to block all access to the internet when your business is closed. This could come in handy in a variety of situations. If you own an AirPort base station, you can use the Timed Access feature to control the days and times when users access the internet. When the Mac is connected directly to the modem, did you have to setup the AirPort (on the Mac) for PPPoE?AirPort Apple Apps Backups Developer Education Email Hardware Internet iPad iPhone Mac Music Network Photos Security TV Weekend WonkĬontrolling AirPort Network Access with Time Limits If I connect directly from my modem (Speedstream 5200) everything works fine. That would be correct as only the device connected directly to the DSL modem would be required to be set up for PPPoE. It is NOT set for PPPoE, but rather DHCP. Share a single IP address (using DHCP & NAT) (enabled) Connect Using: PPP over Ethernet (PPPoE) Temporarily, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, use the AirPort Admin Utility, to check these settings: Power-on the AX Wait at least 5 minutes. ![]() Power-on the DSL modem Wait at least 30 minutes. If possible, leave the modem off overnight.) If so, let's double-check your AX's settings, but first I recommend a complete power recycle of your network components. ![]() I'm assuming that you are using the AirPort Express Base Station (AX) and understand it to be something like the following:ĭSL modem > (Ethernet cable) > AX > (wireless) > rrect? AirPort Express and the AEBS, so I would like for you to confirm your current network configuration.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |